Skip to main content

uni-gtw

Unofficial open-source ESP32 firmware for controlling blinds and devices manufactured by Mobilus sp. z o. o. compatible with the the Mobilus COSMO 868 Mhz RF protocol.

Why uni-gtw

A cheap and easy way to integrate your blinds into Home Assistant

Runs on commercially available boards

uni-gtw runs on many ESP32 (ESP32-C3, ESP32-S3) boards with the SX1262 or CC1101 radio modules. They can by purchased on Aliexpress or Allegro at 10x less than the first party COSMO | GTW gateway.

Fully local and open

The gateway natively connects to a MQTT broker via the local network and automatically integrates with Home Assistant. No cloud services or internet connection is required for operation.

Supports older blinds

The gateway can control devices manufactured before 2017, which use the older COSMO protocol. This is another advantage over the official gateway.

Getting started

Consult the manual pages listed below.